Page 1 of 86
In the last decade, the popularity of UAVs, colloquially known as drones, has increased tremendously. Nowadays, drones are used in a wide range of use-cases, such as precision agriculture, surveillance, and ph...
The accuracy of target passive localization is influenced by the placement of signal receiving stations; therefore, many studies have been performed to optimize station placement. However, most of the present ...
The metasurface is a promising technology that can help next-generation wireless communication systems not only improve the signal-to-noise ratio (SNR), but also increase security and mitigate interference. Fu...
The increasing prevalence of Internet of Things (IoT) systems has made them attractive targets for malicious actors. To address the evolving threats and the growing complexity of detection, there is a critical...
This paper investigates energy-efficient communication within an integrated sensing and communication system. The system employs a dual-function radar-communication base station. This base station concurrently...
Simultaneous wireless information and power transfer (SWIPT) has been advocated as a highly promising technology for enhancing the capabilities of 5G and 6G devices. However, the challenge of dealing with larg...
This paper focuses on radio resource management (RRM) in multi-user dual-function radar communication (DFRC) systems using orthogonal frequency division multiplexing (OFDM) waveforms. We propose two RRM scheme...
In this paper, we improve networks’ spectral efficiency (SE), extend networks’ lifetime, and maximize networks’ energy efficiency (EE) of two-way full-duplex (FD) relay networks. Firstly, to improve networks’ ...
Multiple-input–multiple-output (MIMO) systems have effectively addressed today’s high demand for 5G communications and beyond. Further, MIMO-assisted space–time block codes (STBCs) have been shown to enhance t...
Communication services that are dependable are crucial, particularly during emergencies when the regular infrastructure for communication may be disrupted or nonexistent. In such situations, device-to-device (...
This paper addresses the issue of constructing millimeter band antennas using dielectric waveguide structures. A new type of linear antenna, incorporating metal pins on the side walls of the grooved dielectric...
Because of recent developments in wireless communication, sensor technology, and computing technology, researchers have recently shown a significant amount of interest in the Internet of Vehicles (IoV), which ...
In communication technologies, device-to-device (D2D) communication is essential for resource management and power control, which are major research concerns nowadays. D2D resource allocation involves dividing...
In the sixth-generation (6G) wireless networks, the use of unmanned aerial vehicles (UAVs) and tethered balloons (TBs) to assist cellular networks has attracted considerable attentions due to their dynamic and...
With the birth of the IoT era, it is evident that the existing number of devices is going to rise exponentially. Any two devices will communicate with each other using the same frequency band with limited avai...
This paper investigates distributed cell-free massive multiple-input multiple-output with non-ideal user equipment hardware under spatially correlated channels. By employing the use-and-then-forget technique, ...
Conventional optical spatial modulation (SM) scheme activates one of the light-emitting diodes (LEDs) to transmit an intensity-modulated optical signal, in which the index of the activated LED is determined by...
With the increasing user density of wireless networks, various user partitioning techniques or algorithms segregate users into smaller, more manageable clusters. The benefit of user clustering techniques in no...
In the context of 6G and 5G communication networks, particularly in disaster-stricken areas with a surging demand for connectivity and the rapid evolution of the internet of everything (IoE), the imperative fo...
Pilot contamination is a serious issue in massive multi–input–multi–output systems which significantly degrades system performance. In this paper, we investigate a new pilot assignment scheme by integrating tw...
This paper presents a Highly Isolation open-loop resonators (OLR)—based microstrip full-duplex Tx/Rx antenna systems with low insertion loss for contemporary wireless system applications. Through a T-junction ...
Mobility is a fundamental feature of mobile edge computing. Due to the mobility of users, the contextual attributes of cloudlets such as server resources and network state will dynamically change with time dur...
The Internet of Things (IoT) is spreading rapidly around the world, and Message Queue Telemetry Transport (MQTT) is one of the main protocols used to explore device-to-device (D2D) communication. The industry ...
With the widespread use of wireless sensor networks, one of the most pressing concerns is extending the lifetime of the sensors. By deploying directional antenna arrays, millimeter wave (mmWave) is a possible ...
The majority of IoT implementations demand sensor nodes to run reliably for an extended time. Furthermore, the radio settings can endure a high data rate transmission while optimizing the energy-efficiency. Th...
Recently, there has been an increasing interest in monitoring and exploring the underwater environment for scientific applications such as oceanographic data collection, marine surveillance, and pollution dete...
We consider a fundamental file dissemination problem in a two-hop relay-based heterogeneous network consisting of a macro base station, a half-duplex relay station, and multiple users. To minimize the dissemin...
The most important function of the deep learning (DL) channel equalization and symbol detection systems is the ability to predict the user’s original transmitted data. Generally, the behavior and performance o...
Wireless localization technology has been widely used in indoor and outdoor fields. Channel estimation based on channel state information is a hot research topic in recent years. However, due to the interferen...
Due to the dense deployment and the diversity of user service types in the 5G HUDN environment, a more flexible network selection algorithm is required to reduce the network blocking rate and improve the user’...
Wildfires are one of the most frequent natural disasters which significantly harm the environment, society, and the economy. Transfer learning algorithms and modern machine learning tools can help in early for...
The 5G New Radio synchronization procedure is the first step that the user must complete to access the mobile network. It mainly consists of the detection of the primary and secondary synchronization signals (...
A dual-port multiple-input multiple-output (MIMO) filtenna with minimal sizes of 80 × 45 mm2 is set up in this study. Each element in this MIMO filtenna is positioned orthogonally to the one next to it to improve...
This paper presents a novel design of a compact, wideband tunable microstrip filtenna system for effective spectrum sensing in cognitive radio (CR) applications. The proposed filtenna structure has a total ban...
The original article was published in EURASIP Journal on Wireless Communications and Networking 2023 2023:50
Learn more about the impact the EURASIP Journal on Wireless Communications and Networking has worldwide
2022 Citation Impact
2.6 - 2-year Impact Factor
2.5 - 5-year Impact Factor
1.098 - SNIP (Source Normalized Impact per Paper)
0.985 - SJR (SCImago Journal Rank)
2023 Speed
23 days submission to first editorial decision for all manuscripts (Median)
157 days submission to accept (Median)
2023 Usage
1,226,841 downloads
99 Altmetric mentions
​​​​We offer a free open access support service to make it easier for you to discover and apply for article-processing charge (APC) funding. Learn more here.
